Plantarray Client
To calibrate the lysimeters: Use a spirit level to check that all of the lysimeters are leveled and then start the weight calibration process. Use two sta...
Mon, 22 Nov, 2021 at 11:35 AM
Different irrigation treatments can be programmed into the system. Each irrigation treatment is a daily schedule of irrigation events that can be terminate...
Mon, 22 Nov, 2021 at 11:36 AM
To edit the general settings of the experiment: In the operating software, go to the experiment's name tab (the name you chose for your experiment,...
Mon, 22 Nov, 2021 at 11:37 AM
Plants could be categorized based on various labels (e.g., treatment, species, line) to be presented or analyzed on SPAC-Analytics. The labeling is done in...
Mon, 22 Nov, 2021 at 11:38 AM
The selected "Soil Type" will determine which calibration curve will be applied to the raw data from the soil sensor to get the correct soil Volum...
Mon, 22 Nov, 2021 at 11:39 AM
To use the function of irrigation by soil sensor according to the measured Volumetric Water Content (VWC): When setting an Irrigation Treatment, select...
Mon, 22 Nov, 2021 at 11:40 AM
For your convenience, the calibration curves for converting the raw dielectric values of the sensors to Volumetric Water Content values are available to dow...
Sun, 17 Oct, 2021 at 2:04 PM
In the "Treatment Scenarios" section, desired irrigation scenarios can be assigned to each group of plants in an experiment. Different termina...
Thu, 8 Sep, 2022 at 12:05 PM
The Positions table in the "Positions" section includes general information about all of the units (controllers) in the system: Alias - Ni...
Tue, 29 Nov, 2022 at 2:49 PM
The "Plants" table contains information about the experiment setup and experimental design. It includes information about each position (pot) in...
Wed, 25 Jan, 2023 at 9:35 AM